Amermac

Tire Truers

Your wheel and tire service shop is not complete without Amermac's profitable Tire Truing equipment.

Model 1200-R Racing Truer

The 1200-R comes crated, completely assembled, wired and ready for immediate use. The cutter and drive motors are 60 Hz., 110-115 volt, single phase. Shipping weight is 500 lbs.
See Adapters and Accessories for more information about the options for this model.

The newest addition to the Amermac line of products is the Model 1200-R Racing Truer with an optional automatic cross-feed.

The truer is specifically designed for racing tires and produces a flat surface or may be adjusted for an angled cut of up to (plus/minus) three degrees. The Model 1200-R comes with one adapter plate to your specification.

Product Features

·         Infeed dial for depth control  

·         Ball bearing blade motor with fixed shaft (cannot gouge tires)  

·         Ball bearing supported mandrel for static balancing 

·         Automatic blade sharpener with manual override and blade guard

·         Minimum set up time; fast one man operation  

·         Console master control panel 

·         Console master control panel 

·         Work light with flexible shaft  

·         Large wheel weight storage trays

Product Benefits 

·         Complete Vibration control can be achieved through truing and balancing

·         Achieve faster and more consistent lap times

·         Tires will hug the track better

·         Easy to operate

·         Smoother runs because of reduced vibration

·         Adapter plates to fit most race car, legend car, and race truck lug nut patterns

·         Reduces wear-and-tear on front-end parts

Available Options

·         Automatic Cross Feed

·         Air Jack Ramp

·         Cones for Hub Mounting

·         Adapter Plates

·         Cones for Hub Mounting

The 711 comes crated, completely assembled, wired and ready for immediate use.   The cutter and drive motors are 60 Hz., 110-115 volt, single phase.  Shipping weight is 500 lbs.

See Adapters and Accessories for more information about the options for this model.

With Amermac's fast, accurate tire truing and wheel balancing equipment, one man can turn out a vibration-free tire in just 5 minutes.

This rugged, heavy duty machine is designed for the new wide profile tires and for passenger and truck tires through 11:00-22 and up to 18" wide.

Product Features

·         Built-in tire centering gauge

·         Built-in profile follower

·         Ball bearing blade motor with fixed shaft (cannot gouge tires)

·         Automatic sharpening with manual override

·         Ball bearing supported mandrel for static

·         Tire radius gauge

·         Minimum set up time - fast one man operation

·         Console master control panel

·         New safety blade guard

·         Large wheel weight storage tray

·         Flexible shaft work light

·         Truck adapter optional

·         Series 80 adapter kit precision mounting of domestic or foreign cars and light trucks

·         Easy to merchandise

·         Helps reduce the number of tires your business purchases

·         Easily operated by anyone

·         Reduces vibration caused by out of round tires

·         Reduces wear-and-tear on front-end parts

·         Adapter plates available to fit most automobile lug nut patterns

Available Options

·         Truck Adapters

·         Air Jack Ramp

·         Power Cross Feed

·         Magnetic Test Weights

·         Cones for Hub Mounting

·         Hub Pilot Mounting Aluminum Adapters

·         Adapter Plates that fit many older, rare automobiles.

We can help eradicate a bumpy ride and extend the life of tires with our patented Tire Truers.

Porta-Truers

·         Self-sharpening blade with manual override and blade guard

·         Work light with flexible shaft

·         Makes cuts of up to 9" wide on a 24" profile

·         Wider radius than previous models

·         14 foot power cord

·         Compactable design for easy and quick storage

Fast, accurate, portable and designed to true the tire without removing the wheel.

Heavy Duty for Dual Drives and Tandem Trailer Wheels

The 400-B comes crated, completely assembled and ready for immediate use.  The shipping weight is 300 lbs (includes scooter seat and weight tray).  The cutter and drive motors are 60 Hz. 110-115 volt, single phase.

·         Fast accurate and dependable, this heavy duty portable truer is designed to rollup to any vehicle and true the tire without removing the wheel.

·         The entire job can be completed within a matter of minutes.

·         Truing the tire on the wheel bearings insures absolute accuracy.

·         The Model 400-B also features a built-in profile follower and the handle folds down for convenient compact storage.

·         With Amermac's maintenance free operations, Porta-Truers are a big profit makers in any wheel service shop.

Included with Porta-Truers:
Our newly re-designed Scooter Seat

New

·         Built-in profile follower

·         Self-sharpening blade with manual override and blade guard

·         Work light

·         Makes cuts of up to 17.5" wide on a 24" profile

·         14 foot power cord

·         Compactable design for easy and quick storage

·         Handle folds down for compact storage

Amermac's new heavy duty portable truer is designed to handle truck, trailer, passenger car and racing car tires.

Engineered for larger, extended width tires.

The 405-W comes crated, completely assembled and ready for immediate use.  The shipping weight is 300 lbs (includes scooter seat and weight tray).  The cutter and drive motors are 60 Hz. 110-115 volt, single phase.

·         Versatile

·         Maintenance-free

·         Economical

·         Easy to store

·         Portable

·         Designed for wider tires

·         Fast and accurate

·         Tire is trued on the Wheel bearings for absolute accuracy

·         Big profit maker

Included with Porta-Truers:
Our newly re-designed Scooter Seat

New