RTI Filtration Eliminator II E4000

  
       
  Eliminator II E4000  
  Eliminator II E4000 BENEFITS
▪ Continuous Low Dew Point Operation
▪ Easily Maintained and Serviced
▪ Upwards Compressed Air Drying
▪ Built-in Dew Point w/ Indicator
▪ No Desiccant Dust Migration
▪ Low Pressure Drop Design

FEATURES
▪ Activated Carbon Prefilter
▪ “Inverse Flow™” Technology
▪ Automatic Drain in 1st Stage
▪ Built-in Final Filter
▪ Spin-on/Spin-off Desiccant Canisters
▪ Wall Mountable Designs

  
   
   
   
   
   
   
   
   
   
   
   
   
   
   
 

APPLICATIONS
The ELIMINATOR II is designed to:
▪ Operate only one paint gun.
Do not attempt to operate multiple
paint guns with this unit.
▪ Provide dry, oil-free air to -40°F dew
points, virtually free of dried particulate.
▪ Be installed as close as possible to
the point-of-use and as far as
possible from the compressor.

Port Size

Inlet: ½” - Outlet: ¼”

Thread Style

NPT

Dryer Design

Manual, Refrigerated

Recommended Temp

100° F

Maximum Pressure*

150 PSIG  

Dryer Capacity

-40°F

Filter Capacity

1.0 micron and larger

 

Activated Carbon Oil Absorption

 

to 0.003ppm

Flow Capacity 

30 SCFM

Differential Pressure

<5.0 PSID at Rated Flow

Height

19.0”

Width

15.0”

Depth  

  5.0”

Weight   

  12 lbs
 
   
   
   
   
   
   
   
   
   
   
     
   
   
   
   
  Upgrade these popular RTi filter/dryers to spray today’s high tech paints which require lower compressed air
humidity (less than 10%) to guarantee you the flawless finishes that you expect and demand.		  
   
   
   
  Back to Filtration Main    
   
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
         
         
         
         
   

Rep-quip © 2008

  
   

1740 Hudson Bridge Road, Suite 1185, Stockbridge, GA 30281          TEL: 770 320 7276        FAX:770 320 7277

  
   

Home       Links       Equipment Lease      Contact       Site Map